EXPRESS LINE

With its large top and bottom rails, heavy in-house fabricated door frames and hinges, large full-length drop gussets, and rugged look, the new Express Line from Exiss is the ultimate in trailer manufacturing. The rear of the Express Line features the rugged tail light brackets and extruded aluminum hinges and a door frame with a concealed rubber seal. For added safety, the rear doors of the Express Line come with spring-loaded door holdbacks to keep the door locked open when in use. The Express Line features one of the largest top rails in the industry. Notice the smooth exterior welding present on all exposed welds. The collapsible rear tack in the Express Line comes complete with a saddle rack, an aluminum halter hook bar, and a brush tray. The saddle rack is easily removable and can be quickly placed in the optional dressing room location. All Express Line gooseneck models feature a 3/16” full-length aluminum drop gusset, giving it an added degree of strength. The feed doors on the Express Line are fabricated in-house, using the same large extruded aluminum door frame, aluminum hinge component, and concealed rubber seal that are used on the rear door and escape door. The horse dividers feature a corrugated extruded aluminum panel design, and come complete with stall pads and feed bags, showing that safety as well as convenience are important to us.The personnel manufacturing the Express Line trailers take great pride in workmanship, finish and detail. Be sure to compare all of these features when shopping for your next horse trailer.

TRAILER FEATURES

Sidewall Construction: .063 white pre-painted baked on enamel with 1 5/8” X 3” side posts.

Wheels & Axles: Two – 5200# axles with electric brakes and five – 16” 8-hole steel modular wheels with Goodyear ST235/80R16 radial tires

Nose: Stainless steel front panel and corners on 5’ tapered gooseneck nose

Coupler: 2 5/16” adjustable coupler

Rear Doors: Double rear doors with 15” X 24” windows, bars, removable center post with pressure latches, and spring-loaded door holdbacks

Head Side Windows: Three drop down feed doors with windows and drop down bars in last two stalls (escape door at first horse)

Tail Side Windows: Four 15” X 24” windows with bars

Tie Rings: Four outside tie rings

Dimensions: 7’ inside height – 7’ outside width

Landing Gear: Single leg landing gear with removable crank handle

Graphics: Graphics package

DRESSING ROOM FEATURES

Gooseneck Windows: One 15” X 24” window with screen on each side of gooseneck

Camper Door: One dressing room door with window and deadbolt

Interior Lights / Switches: Two dome lights in dressing room with one wall switch

Wall: Solid roof to floor wall separating dressing room from horse area

Carpet: Carpet on floor of dressing room, drop, gooseneck floor and solid wall

Saddle Rack: Four saddle racks on removable post with extra location in rear tack

Accessories: Aluminum halter hook bar, one blanket bar, one brush tray, and a 5’ clothes rod

HORSE AREA FEATURES

Lining / Insulation: Horse area side walls are insulated and lined with .100 aluminum up 48” high with white lining above and 6mm rubber up 48” high

Interior Lights / Switches: Two dome lights in horse area and one in rear tack with one wall switch on rear frame

Floormat: Lifetime rubber floor mat

Roof Vents: One pop-up two-way aluminum roof vent per horse

Rear Tack Compartment: Fold-up removable rear tack with carpeted wall lined on one side with a saddle rack location and an aluminum halter hook bar with six hooks

Escape Door: Escape door in front of first horse

Padded Bars: One padded bar at rear loading door and one padded breast bar at escape door in front of first horse

Dividers: Padded slant stall dividers with body, shoulder and head separator with slam latch system

Tie Rings: Two inside tie rings per horse

Feedbags / Rings: One feedbag and three feedbag rings per stall