Event Stock Combo Bumper Pull Trailers

SPECIFICATIONS

Slant wall tack room
Extruded aluminum exterior finish in stock area, .063 white pre-painted, baked on enamel on front (most manufacturers use a thin gauge .040 or .050)
7’ inside height & 7’ outside width
Extruded Exiss aluminum non-skid flooring (15% stronger than competition)
1 5/8” X 3” closed side posts (one of the heaviest in the industry)
Two top air spaces with plexi-glass capability (sides only)
Spare tire carrier
Extruded aluminum exterior finish in stock area
Two – 3500# rubber torsion axles with electric brakes on STC 13
Two – 4800# rubber torsion axles with electric brakes on STC 16
Four – 15” 6 hole steel modular wheels on STC 13 and 16” 6 hole on STC 16
Four – ST225/75R15 radial tires on STC 13 and ST235/80R16 radial tires on STC 16
2 - 5/16” adjustable coupler with crank down jack & wheel
One dome light in tack area, one dome light in stock area
One wall switch for tack room dome light
One switch on the rear frame for stock area dome light
Full swing rear door with slider (air like sides)
One camper door with window and deadbolt
Solid roof to floor wall separating tack room from stock area (lined one side with .100 aluminum)
.100 aluminum up 48” on curbside wall in stock area
6mm rubber up 48” on curbside wall, 42” on slant solid wall in stock area
All aluminum “V” hitch
Running boards
Three outside tie rings

POPULAR OPTIONS

Stripes
ST225/75R15 spare (STC 13)
ST235/80R16 spare (STC 16)
Plexiglas inserts